Re: Manifold gaskets

Posted by Joe on April 25, 2003 at 17:07:22 from (216.190.145.135):

In Reply to: Manifold gaskets posted by Jeff on April 24, 2003 at 18:37:57:

Jeff,
I own a MF 40 with an AD 152 that the exhaust flange gasket needed replacing. I too ran into the problem of finding high-temp gasket material to cut my own gaskets. Solution was a comprimise. I went to NAPA looked through the gaskets they had on hand and low and behold a flange gasket for a chevy cavalier. This was not an exact fit, but the circumfrence of the exhaust tube was almost perfect. The bolt holes did not align, however, the gasket is high temp material, new bolt holes were drilled, the problem is fixed. Maybe try a little diffrent approach.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Manifold gaskets Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]