Re: Fuel injector problem on 1066 Farmall

Posted by RAS on April 23, 2003 at 21:38:09 from (66.87.12.37):

In Reply to: Fuel injector problem on 1066 Farmall posted by Tim Baldwin on April 23, 2003 at 20:02:29:

Make sure it is a second brass ring and not the bottom of the copper sleve. You can use a small screw driver and wedge it into the bottom of the ring and it should come out. Use a small brush and clean the bottom of the sleve, Install new copper and try again. If it still leaks you will have to replace the copper sleve. Don't forget to drain the water if you have to replace it>

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Fuel injector problem on 1066 Farmall Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]