Re: Question: replace /repair Allis-Chalmers B front wheel spindle

Posted by wdTom on April 23, 2003 at 17:16:14 from (155.212.222.130):

In Reply to: Question: replace /repair Allis-Chalmers B front wheel spindle posted by robert m. rottman on April 22, 2003 at 08:39:29:

I would think it could be straightened with a press and a little time. Machine shop job if you don't have a hydraulic press. As for the wear, I would think it could be built up with spraying matal on similar to repairing a crankshaft. I don't know the cost though. Then you would have to have it machined down to size again. The only other way out of this is to find a used one. Maybe difficult as wide adjustable front ends are probably mostly in use because of the desireability of this option.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Question: replace /repair Allis-Chalmers B front wheel spindle Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]