Re: Rear blade trenching question

Posted by TimV on April 22, 2003 at 16:43:00 from (64.19.90.193):

In Reply to: Rear blade trenching question posted by Sam Hopkins on April 22, 2003 at 10:37:34:

Sam--you may be closer than you think. Check the area around where the 2 bolts hold the blade to the 3-point for additional bolt holes. Some of these blades have another set of holes for putting the blade at an angle. If your blade is old, the extra holes may be filled up with rust, dirt, etc. so you may have to scrape a bit.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Rear blade trenching question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]