|
Tractor Talk Discussion Board |
Re: Re: Re: Re: Re: Case 1070 A/C Freon charge
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob (Certified in both automotive and stationary refrigeration) on April 18, 2003 at 21:35:27 from (66.231.124.204):
In Reply to: Re: Re: Re: Re: Case 1070 A/C Freon charge posted by Bud on April 18, 2003 at 04:37:06:
Yes, I realize you have the line with the bulb, and my previous post is correct... the other little line does not bypass freon, due to the internal construction of the expansion valve. The other small line as I previously posted, conducts a pressure signal to the diaphragm in the expansion valve reflecting the evaporator outlet pressure. Are you aware there is normally a cone-shaped screen inserted in the input side of the expansion valve? With the readings you have, either this screen is plugged, missing (which leads to plugging the expansion valve internally), or the expansion valve is defective. Do yourself a favor, and replace the TXV, and that should end your problem.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|