Re: Post hole digger stand

Posted by Bill Smith on April 18, 2003 at 10:19:36 from (63.147.130.37):

In Reply to: Post hole digger stand posted by thebigron on April 16, 2003 at 20:13:42:

Old farmers trick. Find a tree with a fairly good sized limb that is level and about 7' up from ground. With small length of chain, back up to tree and chain digger to tree limb. Lower three point and unhook digger. No stand needed. To hook back up just back up to the digger. Hook up, raise, and unhook chain. Then it is not in the way in or around the shop while not in use. Not really any real good reason to store digger in shed. Just keep the tractor end of P.T.O. shaft off of the ground.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Post hole digger stand Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]