Re: Re: Can cast be welded?

Posted by cadillac on April 16, 2003 at 11:26:55 from (65.165.161.7):

In Reply to: Re: Can cast be welded? posted by Farmer in the Dells (WI) on April 16, 2003 at 09:53:27:

Yes, but with an Oxy-Acetylene torch you can also do a fine job on those needles too. In my opinion the baler needles hold together better with brazing than with nickel arc rod. The bronze seems to be more flexible. Tack one side, then vee the other side. Braze the vee, then vee the side you tacked first. Then braze the second vee. Cool verrrrrrrrrrrry slowly. Grind smooth. Be sure you get the timing exact when you put it back together or you'll break them off again. (Maybe you already figured that out.)

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Can cast be welded? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]