Tractor Talk Discussion Board |
Re: Oliver 1655
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Shep VA on April 11, 2003 at 06:06:14 from (68.152.9.254):
In Reply to: Oliver 1655 posted by Tom on April 10, 2003 at 20:16:56:
Just put a 5.9L Cummins engine in a 1655 this past winter, got all the pictures of it on my website, I do have a couple pictures messed up at the moment but I should get that fixed here soon. There is a place out in the midwest that will sell you the engine and all the retro fit parts you need to do this conversion, but you will pay for it. I think they start thier kits at about $9K and it goes up from there. I am thinking I have about $6K in my conversion but the engine that I used was not new, it was a rebuilt engine out of a Case tractor. Shoot me an email if you have questions, I have done several Olivers like this.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|