Re: Front mounted 3 point hitch

Posted by off the land on March 25, 2003 at 15:49:32 from (63.214.103.211):

In Reply to: Front mounted 3 point hitch posted by Curious George on March 25, 2003 at 12:36:58:

I believe Deere offered a angle snow blade by '64,
that used an implement lift cylinder attached to a
front lift frame. The blade had a hinge at about
the point beneath the radiator, was braced to the rear axles. I saw it on a 3020 WFE, at auction
in '66. No aftermarket name on the set up, I saw,
Deere green, no signs of being fabricated by a
shop. It did not resemble a front three point
hitch. I was interested, but it sold with the
tractor.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Front mounted 3 point hitch Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]