|
Tractor Talk Discussion Board |
Re: Discing question?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bill Smith on March 05, 2003 at 17:37:17 from (63.147.130.63):
In Reply to: Discing question? posted by Randy on March 05, 2003 at 14:15:04:
Do you use this prairy field for pasture or haying? If so, I don't think you would want to disc the edge for a fire block. That would tear up the sod to a point that you would have to re-seed it or something. And if you chose to not re-seed it, that strip will just grow up to weeds and trees. I ussually burn against the wind, to create a fire block. Go along setting the fire and let it burn against wind, and put it out as you go along the fire that goes the other way. Then when the fire block strip is burned you can go to the other side of patch and light it up. Of coarse if is that tall tall stuff then you are going to have problems no matter what. Seen fires jump fire blocks before, especially on really tall grass. And that tall grass will generate heat when burning and create its own draft (wind) even on a calm day. If you have that really tall grass, I would advise you to mow a sizeable strip around edge, and keep it mowed down all year and plan on burning the center next year. That is if you want this patch to remain in grass. I am oppose to extra work myself such as tearing up grass and then having to re-seed just for a fire block that you could gain in another way. As for discing though, most disc's are designed to float without any down pressure other than gravity. You might want to add weight to the disc so that it is heavier. However on sod is not a very good place to see whether the disc needs extra weight. Not uncommon to have to hit sod several times with disc to actually get it tore up.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Trailering Your Tractor - by Curtis Von Fange. One of the fun things of summer and fall are the parades and tractor shows that go on across America. Many owners of tractors travel long distances to attend these shows and they usually take their restored iron along with them. Safe trailering practices and inspections will ensure that the event is a fun one. A good habit to develop when using a trailer is to give that �quick look over� before taking it on a trip. Before hooking up to it check the tongue for proper operation. The latche
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|