Re: Pull type snow blower

Posted by Don Wadge on February 25, 2003 at 06:52:57 from (205.200.74.201):

In Reply to: Pull type snow blower posted by Randy on February 24, 2003 at 19:02:09:

I presume this is a 3pt blower. Yours may not be made this way but I thought I might twig you on this point in case it is and you might not realize it. Back in the sixties we had either an Inland or a Lilliston blower of this type and the blower portion (V part and fan) could be mounted on the blower frame in either direction so that you could either drive ahead or mount the blower the other way around and push the blower backing up which worked well for deep snow. I think this could be accomplished by pulling two pins and also detaching the PTO from the fan (the fan shaft was made to be driven from either end) then driving around and reattaching the blower portion to the blower frame from behind. Don't know if you get my drift but if you're not familiar with this you could easily miss this feature.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Pull type snow blower Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]