Re: Hyd Cylendar

Posted by paul on February 23, 2003 at 09:37:45 from (209.23.145.48):

In Reply to: Hyd Cylendar posted by Country on February 22, 2003 at 18:35:17:

A hose clamp isn't really designed for hyd
pressures - Don't use it that way. IMHO

Most single acting cylinders have only one
hose.

It is possible, as the other person said, that it
is single acting, with passing the hyds on to
the next single acting cyl - but again, not with a
hose clamp????

I've seen many double ating cyl with both
hoses connecting right near each other.

So the simple answer so far is: Could still be
either way.

--->Paul

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Hyd Cylendar Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]