Tractor Talk Discussion Board |
Re: Live PTO
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim.UT on February 04, 2003 at 14:04:27 from (64.122.18.247):
In Reply to: Live PTO posted by Jimbob on February 04, 2003 at 07:35:15:
Since you say that this is your first tractor and I believe you said earlier that you are looking to put up some hay with this tractor, I thought I might point out the relative merits of "live" pto in your intended application. When baling hay without live pto, when you push in the clutch, the baler stops. If you have a large wad of hay that you need the baler to eat up, it is nice to be able to ease through it while keeping the baler working at full speed. Not possible without live pto. Now you can bale hay without live pto. I do it. I have an 850 Ford. It does take some forethought and some practice. I've gotten to where I can quickly take the tractor out of gear and let the clutch back out to let the baler catch up with a large load that it just swallowed and then I've gotten pretty good at pushing in the clutch and slipping the tractor back into gear before the baler coasts to a full stop without grinding gears too much. Still, live pto would be a lot nicer. Without live pto, the best favor you can do yourself is get good at making your windrows nice and uniform...not too skinny, not too fat.
Follow Ups:
Home
| Forums
Today's Featured Article -
Sunday Drives - by Cowboy. Summer was finally upon us here in Northern Maine. We have two types of industry up here, one being "Forestry" (Wood Products) and the other "Farming" (Potatoes). There is no shortage of farm tractors and equipment around here! I have been restoring old Farm Tractors for the past 6 years, and have found it easier and less expensive to hit all the auctions and purchase whole tractors for parts needed. My wife who works at a local school, and only has weekends and summers off, while on t
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|