Re: Re: Re: NH 166 Selfpropelled Baler

Posted by George G on January 20, 2003 at 15:13:29 from (205.188.209.109):

In Reply to: Re: Re: NH 166 Selfpropelled Baler posted by AL on January 19, 2003 at 17:01:35:

Dan-Pa. is right. I went back though the impiement archives, And their are a couple people that own 166's in there. They all say that one motor run the baler, the other motor run the drive wheel's. Both motor's being 2-cyl. Wisconsin's. My 1280 has a 4-cyl. V460D Wisconsin. NH rates it at 53.8 hp. The thower motor would have been a 1-cyl. Anyway, I've never seen a 166 or a 178. Talked to a fella on this site. Said he took his 166 to the Grease, Steam $ Rust Assn.(Pa.) show last year. I'm going to try to make it down there this year.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: NH 166 Selfpropelled Baler Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]