Re: doin a little winter dreamin

Posted by JMS/MN on January 17, 2003 at 10:16:36 from (63.21.83.53):

In Reply to: doin a little winter dreamin posted by old fashioned farmer on January 17, 2003 at 07:39:04:

I'd check with the place in SD to see how they want it measured- wrapping the tape around the rollers, or c-c of the rollers, plus their diameter? How much they allow for the connector straps and flap, etc. If they haven't made these before, make sure they understand that the slats don't go full width of the canvas, allowing for the guide clearance, if your binder table is built that way.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: doin a little winter dreamin Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]