Re: timing on Continental L-226

Posted by Dave_Id on January 07, 2003 at 13:01:36 from (65.104.255.85):

In Reply to: timing on Continental L-226 posted by Steve on January 06, 2003 at 19:23:56:

Is this the Continental F-226 that's in the Massey Harris 101 Senior, and the 44-6? When reassembling the engine I rebuilt, I noticed an extra dot on one of the gears, or the camshaft, can't remember.. I had to look at the picture in the ops manual real close... Also, when reassembling the oil pump to the engine, it is real easy to get it off one tooth, which will throw timing off 40 degrees. Being a symetrical engine, the rotor could be pointed at either #1 or #6 cylinder, and still be correct.

Follow Ups:

• Re: Re: timing on Continental L-226 Steve 20:35:52 01/07/03 (1)
  • Re: Re: Re: timing on Continental L-226 Don LC 08:47:03 01/08/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: timing on Continental L-226 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]