|
Tractor Talk Discussion Board |
Re: Re: Block Heater?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hal/WA on December 09, 2002 at 16:31:38 from (208.8.194.52):
In Reply to: Re: Block Heater? posted by JoeK on December 09, 2002 at 14:37:46:
I had one on my 48 Plymouth flathead 6 in high school. If you left it plugged in all night, the heater would work as soon as the engine started, even at 0 degrees. Without the heater, that engine just plain would not start at all at O. I have no idea what the wattage was, but it kept that engine very warm. Glad my Dad didn't know I was plugging that thing in overnight all the time! Like the others wrote, I would check it with a meter. If you get some resistance between the two plug terminals and infinite resistance between either terminal and the block, I would try it out and see if it warms the coolant. But be real careful, it could be dangerous to apply house current. When I was a kid we had a VAC that had the easiest starting engine on the place, even with the crank, at almost any temperature. Many times I used it to pull other rigs that would not start, including that old Plymouth. Maybe your VAC is different and needed a heater. Good luck.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
1938 John Deere LI
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
