|
Tractor Talk Discussion Board |
Re: Suggested Manufactories for Metal Buildings
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by BB on November 18, 2002 at 05:05:44 from (65.216.31.130):
In Reply to: Suggested Manufactories for Metal Buildings posted by Russ on November 15, 2002 at 09:51:47:
I put up a 30'x40' prefab metal building myself manufactured by Mueller Steel Buildings, but I believe they are only in Texas. It gets quite hot here also, average about 25 days over 100 degrees per year. My building is insulated and has a white roof. Even on the hottest days, the inside temp does not rise much if any above the outside temp. I put in a 10x10 door on each end. If I am working there in the summer, I just open both doors and the breeze blows thru. I put a large window AC unit thru the wall, but never use it unless I am doing outside work in the summer and need a place to go cool off.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
A Tinker�s Guide to Manifold Repairs - by Curtis Von Fange. A common characteristic of keeping older equipment is that some parts to make repairs can be extremely difficult to locate. For example, finding a replacement for a cracked intake or exhaust manifold on a unique tractor or odd brand can be a frustrating and downright impossible mission. So, what is an alternative solution to scraping out that �one of a kind� piece of history? First, decide if you are one to try a repair yourself or have someone else do it. If you are uncomfortable about
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|