|
Tractor Talk Discussion Board |
15-40 oil Total Base Number HELP
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by d3,Mike on November 08, 2002 at 22:35:44 from (66.81.190.11):
Hi, I would appreciate your views on the high TBN numbers used in most diesel oils used today. I understand that emission controls and longer change intervals make this a requirement. The problem is that I have a newly rebuilt, 1964 Perkins A3-152, that idles a lot and seldom sees much throttle. I also use .05% diesel.This throws the old TBN rule of thumb of about 20 times the sulfur content, for indirect engines, out the window! I know that Cat warns about cylinder polishing and loss of oil control when using a excessively high TBN. and I have heard of other older diesels loosing oil control when the new CI-4 oils are used in engines that do not see a lot of heavy load. So, any thoughts on how high a TBN can be, before it is to high? Also what is a reasonable limit on ash? I would like to use 15-40. Any thoughts or recommendations on my problem would be greatly appreciated! Thank You for your time, Mike [email protected] And yes I did contact Perkins in England, they recommended API CC , I told them that CC was obsolete by about 15 years and they said that they could make no further comment on the subject!
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
12-Volt Conversions for 4-Cylinder Ford 2000 & 4000 Tractors - by Tommy Duvall. After two summers of having to park my old 1964 model 4000 gas 4 cyl. on a hill just in case the 6 volt system, for whatever reason, would not crank her, I decided to try the 12 volt conversion. After some research of convert or not, I decided to go ahead, the main reason being that this tractor was a working tractor, not a show tractor (yet). I did keep everything I replaced for the day I do want to restore her to showroom condition.
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|