David Brown wheel dishes

Posted by Rick Cook on October 29, 2002 at 16:28:50 from (154.5.15.109):

I am looking for rear wheel dishes to fit on a 1963 David Brown 990 Implematic.
The centre hub hole is 5 15/16" - 6" diameter.
The wheel studs are in a 6 bolt pattern with 7" diameter between opposing studs.
I believe the outside diameter of the dish is 28' but that is not particularly important for my purposes.

What I am wondering is there any other dishes except for DB that come with a 6 bolt pattern in a 7" diameter around a hub cut-out of 6"?

Posted to Tractor Talk and Case lists.

Thanks, Rick

Follow Ups:

• Re: David Brown wheel dishes Muddlehead 20:38:46 10/29/02 (0)
• Re: David Brown wheel dishes david 17:29:25 10/29/02 (0)

Post A Followup Name: E-Mail: Subject: Re: David Brown wheel dishes Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]