Re: Prestone strength questions?

Posted by Vern-MI on October 23, 2002 at 17:10:01 from (206.148.231.86):

In Reply to: Prestone strength questions? posted by Steve on October 23, 2002 at 11:30:51:

From the Prestone website:
Q: What is the best antifreeze/coolant concentration for a vehicle? Can I use 100% antifreeze?
A: We recommend that you use between a 50% and 70% concentration of antifreeze. At least 50% is necessary to give the adequate amount of corrosion protection, as well as freeze/boilover protection. However, we do not recommend more than 70% antifreeze. This would cause restriction of the heat transfer capabilities, corrosion protection, and freeze protection. The concentration of freeze/boilover protection of the antifreeze mixture can be checked using a Prestone� Antifreeze Coolant Tester.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Prestone strength questions? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]