|
Tractor Talk Discussion Board |
Re: Hauling 30 diameter 12-16 ft long trees any ideas?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hal/WA on October 16, 2002 at 16:52:50 from (208.8.194.28):
In Reply to: Hauling 30 diameter 12-16 ft long trees any ideas? posted by ray on October 15, 2002 at 14:16:10:
I have had a little experience loading logs with a front end loader, and mine were not nearly as big as the ones you have. It is really spooky! I found that with my 641D Ford, which is about the same size as your 2000, it was necessary to get the log close to balanced and then chain the log securely to the loader bucket. Once the log is loaded and up, steering is really tough unless you have power steering. And if your balancing isn't right, it can feel kind of tippy. You will need weight on the 3 point to get traction when you have a log on. I loaded a number of logs on a flatbed this way, but it was not easy at all, was very slow and cumbersome and seemed very dangerous. I pulled the rest of the logs to my cutting area by skidding them with a chain. Those logs got dirtier, but I was just sawing firewood. I like the looks of the log arch in one of your responses. But to handle logs as big as you are talking, I think you would need something quite a bit bigger and stronger. But if you already have the bandsaw mill, it might be something you could use later in a sideline business, especially if you made it roadworthy and legal. There are lots of trees that go down or need to be taken down in suburban areas that end up being cut up for firewood. I hate to see a nice hardwood wasted that way. Whatever you do, be darn careful. Moving logs is very dangerous work with the proper tools. Without them, it can be deadly.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|