Re: Re: Re: Radiator Fins

Posted by T_Bone on October 09, 2002 at 23:43:27 from (65.57.38.63):

In Reply to: Re: Re: Radiator Fins posted by Ron on October 09, 2002 at 08:11:12:

Hi Ron,

You can also make one if you want. A band saw or jig saw with cuts just like a hair comb but a little wider between the teeth to fit the fin width and space.

I was wondering if the fin metal was farely wide and thick. Thats going to be harder to straighten but it can be done. You may have to resort to a steel fin comb and be easy on the fins.

T_Bone

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Radiator Fins Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]