|
Tractor Talk Discussion Board |
Re: Farmall H with John Deere 45 Loader
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Greg S on October 02, 2002 at 09:54:50 from (205.180.71.120):
In Reply to: Farmall H with John Deere 45 Loader posted by Bruce Herman on October 01, 2002 at 10:23:37:
Bruce,
I've got an H with a 45 series 1 loader on it and if I remember right the seals in the loader are basically built for lifting only i.e. they don't work for down pressure on the loader- they will blow out. You have to be careful with the loader and how high it goes. The belly reservoir on the H only holds 6 quarts of oil, this will limit you on how high the loader will go. I've got live hydraulics on mine and I added a 10 gallon reservoir to work the loader and my 3-point.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Converting from 6 Volt to 12 Volt - by Chris Pratt. It's a common problem for old machines especially when the weather starts to dip below 40 and the tractor isn't fired up as often. You are probably used to the 12 volt Diehard, charged with 200 amp alternator of your 3/4 ton that always is ready and always starts. It's this type of experience that brings about the many queries we get for 12-volt conversion kits. Since only a few kits are available (we sell kits for the
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
