Re: M motors

Posted by John (SC) on September 18, 2002 at 17:19:33 from (206.74.216.114):

In Reply to: M motors posted by Keith on September 18, 2002 at 16:35:20:

The M had 3 7/8 bore stock,with a overbore kit to raise it to 4 inch.The stroke was 5 inches I beleive,cant recall for sure.The M had a 247 cubic inch engine,not 264.That would be a Super M which had the same stroke but a 4 inch bore with a 4 1/8 overbore kit available.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M motors Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]