|
Tractor Talk Discussion Board |
Re: What is a good entry level tractor for a novice?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve - IN on September 14, 2002 at 11:02:10 from (12.222.132.139):
In Reply to: What is a good entry level tractor for a novice? posted by Yardbaby1 on September 13, 2002 at 09:06:31:
You might look through all the photos in the gallery section here, then pick out the ones you really, really like to look at. Reason is: to go from bad to nicely restored, you're going to have to add a lot of work, money, bruised knuckles, complaints from a wife, etc. It will keep you going to have that picture of what you'll see when you get done. Another approach is to get one that has some sentimental attachment or significance. My Grand Dad had a JD 60 and a Farmall H. My Dad had New Gen JD's. Guess what I've got! No 50's vintage gas fired tractor is going to be a whole lot more complicated than another, other than having 2 or 4 cylinders. Of the two you mention, I'd go with the M. JD's tend to hold or have higher value than an Allis. The downside with the M would be working the hitch around to take a 3 pt -- but then you didn't say you were going to actually work it. Everybody has added their personal preferences. For my next one I'd like to get a late model JD B. Nice sized and nice looking tractor (to my eye), fairly easy to work on. JD dealer is close and can get lots of parts. 50's are nice as well, but I've already got a 60. But... JD H's are really cute little tractors, as are red belly Fords, and I've seen a few Allis WD's go fairly cheap, and.... problem is you start behaving like a kid in a candy store! Hope you really enjoy whatever you get! Steve
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|