Re: want to remove rear wheel weights on a 930 CASE need advice.

Posted by RobertTX on August 19, 2002 at 06:04:40 from (64.154.26.248):

In Reply to: want to remove rear wheel weights on a 930 CASE need advice. posted by R Wyler on August 17, 2002 at 18:37:13:

If the weights are like those on my LA, the key is to "spear" the weight in the hole in the center. I used a heavy duty boom on my three point, if you have a loader with forks or a hay spear, that should work. Spear the weight, pick up just a little, then park the lifting tractor securely. Take off the bolts or nuts, slide the weight up on the fork or boom a few inches (watch your fingers) and chain it in place. Get back on the lift tractor and drive away with it. I can install and remove the 713 pound weights on my LA by myself doing this.

Follow Ups:

• Re: Re: want to remove rear wheel weights on a 930 CASE need advice. R Wyler 07:18:48 08/19/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: want to remove rear wheel weights on a 930 CASE need advice. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]