Tractor Talk Discussion Board |
Re: Loose Sleeves
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Dennis Benson on August 18, 2002 at 20:29:54 from (205.188.192.154):
In Reply to: Loose Sleeves posted by Jason on August 18, 2002 at 16:26:44:
Hello, I used to work in a shop that rebuilt engines, and we got a lot of those engines. The head will hold the sleeves tight against the block, the top won't leak water into the oil. What we found was cracks in the lower web between the sleeves. Look to see if there is a crack at the bottom between the sleeves. I don't know of a repair for the crack, maybe some welders will know how to fix it. I understand from Lincoln they have high nickle welding rods for welding cast iron with stick welders, they just sent me an online video to show the process. If it is cracked and needs welding it will need to be welded up in the web to seal between the "O" rings. We used to repair cracks with tapered plugs called cold welding, you may be able to plug the cracks using a right angle drill to drill the hole for the plug, but space is limited, and we weren't able to fix those kind of cracks. That was back in the 1970's and there are more methods of repair now. Dennis Benson
Follow Ups:
Home
| Forums
Today's Featured Article -
Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|