Re: Anyone good with hydralics and power steering?

Posted by jmyt_47 on July 15, 2002 at 07:39:20 from (170.92.1.104):

In Reply to: Anyone good with hydralics and power steering? posted by Steven@nd on July 15, 2002 at 05:48:02:

Hey Steven@ND

I checked into a similar setup using a powersteering pump off a truck to run my hydraulics on the '39 H. the pump didn't have a internal relief valve in the pump. You'll have to add that. You might not have enough flow capacity for using the PS pump off the 450 for both steering and other hydraulics. To keep things simple, you could mount the PS pump, and then mount another pump off the side of the engine or distributor (like the super H) and use the belley pump as a reservior.(I the have instructions for that). Or if you want to combine the systems, I can help you figure out your capacity needs. I'll need to know what cylinder sizes and stroke length you are running. I will also need the serial number or model number of the charlynn unit and the pump you decided to use.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Anyone good with hydralics and power steering? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]