|
Tractor Talk Discussion Board |
Re: Re: Looking for a tractor for a horse property - help!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by paul on July 08, 2002 at 12:56:44 from (206.10.55.210):
In Reply to: Re: Looking for a tractor for a horse property - help! posted by Jim in Michigan on July 07, 2002 at 08:39:57:
I've seen several references to a Farmall 300. I have one, so a couple of notes: With original wide front end, they have a real poor turning radius. They came with the IHC 2-point 'fast hitch' system, not a real 3-point. The early models did _not_ have a top link, later models did, and you can put in adaptor arms to make them 3-point. But, the action isn't quite the same, might not lift as high for things like a post hole digger, etc. I have a row crop model with 3 hydraulics, 5-speed plus TA, the Fast Hitch, and a 2-way distributor hydraulic pump. Nice tractor. Not all have all those options. The TA is the weak point of an IHC, fairly cheap to rebuild, and you'll have to every many thousand hours... ;) --->Paul
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Machine Shops - by Curtis Von Fange. It is a story that repeats itself countless times. In the process of rebuilding a particular section of the tractor there is a broken part for which a replacement cannot be found. The parts houses find in their catalogue that it is unavailable. The dealerships call it a discontinued part. Salvage yards define it as hard to find or, even worse, rare. Everyone on the NET says, 'what is it?' But don�t despair there is another avenue that can be used to get that piece repaired. The local mach
... [Read Article]
Latest Ad:
1 SD Gibson, 1 D Model needs rear end assembled and installed, 1 D Model needs minor repairs, extra parts
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|