|
Tractor Talk Discussion Board |
Re: 8N carb rebuild question.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob on June 08, 2002 at 14:09:04 from (66.163.143.42):
In Reply to: 8N carb rebuild question. posted by Whooly on June 07, 2002 at 20:40:29:
The seals are for the throttle and choke shafts to keep dirt from being drawn in around the shafts and getting in the engine. Your particular carb may or may not have used them. Sometimes there is a brass plug with a hole in it that the throttle or choke shaft passes through that must be removed, the seal intalled in the recess behind the plug, and then the plug is re-installed, or sometimes there is just a recess in the casting for the felt or rubber seal. No matter how the seals are installed, be sure they do not cause the throttle shaft to bind, or the governor will not be properly responsive.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
On the Road with Dave Gohl: Deere Departed Friend - by Dave Gohl. Have you ever had to part with a dear friend? It's not easy. If it's due to death, your feelings could be in disarray for days, months or even years. Even now after almost 4 years, I still miss my dad. I remember when I was a kid my dad sometimes would tuck my brother and I in at night and we would ask him questions about his childhood on the farm. To this day, it's some of the best stories I've ever heard. And now, I'm so glad that I asked those questions, and if I were a little smarter i
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
