4WD could be used only if i have Multipower switch in LOW position

Posted by 1080 with 4WD on May 26, 2002 at 05:05:18 from (193.77.12.126):

Hello!

I have problem with 1080 and 4WD (year 1972). I have Multipower version and 4WD clutch is controlled with
the same oil used for multipower.

Now the problem is that I cannot use front wheel drive if I switch Multipower to HIGH (engine breaking).
If I switch Multipower to LOW 4WD is working but if I go downhill, the engine is not breaking.
Does someone know is this is normal circumstances.

My opinion is that oil pump doesn't have enough power to supply oil for both clutch.

Please help!

Thanks in advance
Dusan

Follow Ups:

• Re: 4WD could be used only if i have Multipower sw DaCcAd 23:26:27 10/08/05 (0)
• Re: 4WD could be used only if i have Multipower switch in LOW position Woodbeef 04:15:01 05/27/02 (1)
  • Re: Re: 4WD could be used only if i have Multipower switch in LOW position Dusan Kuster 04:21:28 05/27/02 (0)
• Re: 4WD could be used only if i have Multipower switch in LOW position Craig MO 16:33:49 05/26/02 (0)

Post A Followup Name: E-Mail: Subject: Re: 4WD could be used only if i have Multipower switch in LOW position Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]