Re: A BIG Mistake Made Loading a Tractor!

Posted by poorerbut on May 13, 2002 at 11:58:40 from (207.0.239.124):

In Reply to: A BIG Mistake Made Loading a Tractor! posted by TMAC on May 13, 2002 at 07:16:12:

Unfortunately, been there, done that. Once was
enough ! Ever since, I block the rear corners
solid and then screw the jack stand down solid on
the ground before I pull out the ramps. I'm
using a 17/3 deck over with bumper hitch hauling
the'70. I also made the third ramp for the narrow
front and carry it on the dovetail . Takes a
little more time to load and unload but one heck
of a lot safer. pb

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: A BIG Mistake Made Loading a Tractor! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]