|
Tractor Talk Discussion Board |
Re: Taking apart the GM 10-SI HELP!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jon Hagen on May 04, 2002 at 21:03:12 from (63.160.198.95):
In Reply to: Taking apart the GM 10-SI HELP! posted by Rod MI on May 04, 2002 at 19:19:35:
Nothing you need or can do to hold the brushes in when you take it apart. You will need to use a aprox 3 inch long steel wire to hold the brushes in the holder while you put it together. When you split the alternator, make sure you split it between the stator and the front case. If you try to split it between the stator and rear case,the stator will be ruined. The bat stud clamps to the rectifier assy with a 7/16 head nut. inspect the rectifier carefully for overheating and melting of it's plastic insulator parts. Many times the stud comes loose because of melting of the case or rectifier insulators. After assembly, be sure to remove the wire that is holding the brushes in the holder or you will burn out the regulator the instant you power the #1 wire( been there,done that) good luck.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
