Re: HYDRAULIC PROBLEMS

Posted by GEO on April 30, 2002 at 14:15:35 from (63.104.132.167):

In Reply to: HYDRAULIC PROBLEMS posted by BOB WILLIS on April 30, 2002 at 10:15:29:

Your check valve is probably stuck. Just under the seat, there is a large hex plug. 1 1/116 wrench will fit it. Remove this plug. There will be a large but weak spring under it. After removing spring, you will have to use your fingers to remove a hollow cup valve. Clean this valve and the bore that it is in with a lint free rag. After reinstalling this valve make sure it is moving up and down freely in the bore. Reinstall spring and plug. Start tractor and try your lift.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: HYDRAULIC PROBLEMS Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]