|
Tractor Talk Discussion Board |
Re: Moving a big rock
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hal/WA on April 06, 2002 at 12:27:52 from (208.8.194.30):
In Reply to: Moving a big rock posted by Stan on April 06, 2002 at 06:03:38:
I am assuming that the rock is already loose from the ground. If not, I use digging bars about 6 feet long to lever big rocks out of the soil, often using smaller rocks for a fulcrum. It is amazing how big a rock a person can move with a long enough lever. My tractor has a front loader that will lift pretty big rocks, but it is not always easy to get them into the bucket. I have levered the rocks into the bucket with the digging bars if I could not just roll them in. I also have just rolled very large rocks that the loader would not lift by putting the bucket a little off the ground and shoving with the tractor in first gear. I live on very rocky ground and pick rock all the time. I would not be without a loader--it is my most used implement by far. When I was a kid, our old tractor did not have a loader. My Dad had what he called a stone boat that was made of the frame rails of some old car or truck cut off about 6 feet. It was turned over so the front curve of the rails was up, to give a sled runner effect. On top of the rails were 2" planks which made a solid, very low floor that we rolled or tossed the rocks on. We then dragged the stone boat to the rock piles with the tractor. Of course, the stone boat had to be unloaded by hand. It was a lot better than carrying each rock to the edge of the field, but still a lot of work. In my area there are huge piles of rocks that farmers have taken off the fields, probably mostly with stone boats. I like the car hood idea--cheap and easy. Or ask a buddy to come over and show how strong his loader is! But if you have many rocks to move, I would consider getting a loader. Once you have one, you will wonder how you ever got along without one. I use mine for all sorts of things, not just moving rocks, dirt or manure.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|