|
Tractor Talk Discussion Board |
Re: MF 180 - Steering pump problem
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by G.A. on March 23, 2002 at 06:46:44 from (65.64.69.95):
In Reply to: MF 180 - Steering pump problem posted by wolftoy2000 on January 17, 2002 at 17:21:21:
hello there. I have an MF-180 with similar problems and don't seem to find a solution. I've put a kit in it last summer but it's right back to the original problem. Also I had trouble finding the right parts schematic when I finally found it and took the pump apart I found that the assembly intruction didn't quite match the way the pump was put together in the first place. Realilzing that the pump, althgough was taking air, was working I went ahead and put it back together the way it come out. Obviously this was the wrong decision. I'm about to take it apart again and try to put together the exact way the schematics show. Maybe this will solve the problem but I have my doubts. Have you found a solution or a fix for the problem you were having? if so would you share it with me? Thanks in advance.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
The Ferguson System Principal An implement cutting through the soil at a certain depth say eight inches requires a certain force or draft to pull it. Obviously that draft will increase if the implement runs deeper than eight inches, and decrease if it runs shallower. Why not use that draft fact to control the depth of work automatically? The draft forces are
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|