Re: Massey Fergerson 1135

Posted by carl in nc on March 18, 2002 at 19:38:27 from (205.188.199.159):

In Reply to: Massey Fergerson 1135 posted by Gary Osborne on March 17, 2002 at 05:35:18:

If you have hydraulic pressure elsewhere I would check to see if the linkage on the draft control wheel had been turned out of adjustment, or one of the linkage adjustments in the pressure, position, or draft links was messed up. these can be accessed through the inspection plate in the cover behind your feet when sitting in the drivers seat. If the pressure link plunger slips out of the little vertical tube it slides up and down inside of, you will get no pressure to the three point hitch.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Massey Fergerson 1135 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]