Re: Fly Wheel Start

Posted by Jeff on March 13, 2002 at 16:27:43 from (134.126.190.188):

In Reply to: Fly Wheel Start posted by Eric on March 13, 2002 at 04:54:59:

You can also start a tractor by using the belt pulley. This works the same way as all the other methods. Its easiest, if not the only way, when the tractor is hooked up to an implement with a belt. you just engage the PTO and pull on the belt. Its sort of hard to do but if you have something like a big saw mounted in the front blocking the crank its not a bad way. Like any of the other ways mentioned, its dangerous and should be done cautiously. Don't forget that when it starts whatever you have hooked up to the belt will be running so be careful with that too!

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Fly Wheel Start Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]