Re: square balers

Posted by Jon D on March 01, 2002 at 18:39:06 from (68.46.37.195):

In Reply to: square balers posted by Keiren on March 01, 2002 at 12:50:34:

The main benefit was that you can adjust the speed of the tractor with the trottle since the older tractors didn't have much of a selection of gears. Getting the right speed for baling is very importaint and when a tractor only has six gears and in order to run the pto it must stay running at high rmps, the motor on the baler makes things a whole lot easier. I wouldn't say it's because the tractors didn't have enough power since you need a good size tractor to do that with or else, the stroke of the plunger is going to push that tractor around a lot.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: square balers Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]