Re: IH GRILL SIZE

Posted by The Dukester on February 23, 2002 at 13:27:02 from (65.89.18.152):

In Reply to: IH GRILL SIZE posted by RANDY on February 22, 2002 at 15:19:32:

Well, it's pretty simple. If the grill has no insert cutaway,( a rectangular hole in the bottom center), it's for the W-6 type. Having the insert cutaway with no round holes in the third level up 4 slot pattern makes it an M or Super M grill. If it has the insert cutaway and the two round holes in the third 4 slot pattern up from the bottom(the big round holes about half way around), it's a Super MTA grill. All M-MTA grills had the two little holes near the center vertical rib a little over half way up, the W-6 grills had none. Got it?? If the grill's a couple of inches narrower and somewhat shorter, it's an H, Super H, or W-4 grill with the same characteristics, more or less. Hope this helps you.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH GRILL SIZE Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]