Re: Need help with pick-up truck transfer case, no 4x4 anymore.

Posted by CHECK YOUR LINKAGE first! on February 13, 2002 at 16:33:02 from (205.188.192.171):

In Reply to: Need help with pick-up truck transfer case, no 4x4 anymore. posted by Canadian Cowboy on February 11, 2002 at 19:37:44:

DOuble check your linkage and make sure it is actually putting the truck into 4 wd. Those old Ford linkages liked to rust up and seize, which makes it real hard to hit 4wd. Get right down under it, have a buddy put the shifter through its paces. Now that you can see what direction to move the shaft, disconnect the linkage and see if you can get it to move into gear that way. LOTS of PB Blaster and a torch,can get teh shifter working again. Take it out and bring it in the shop to free it all up. Might need some new nylon bushings where the rust wore teh old ones out.

Hoping this is your problem and not something internal.

Truck

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Need help with pick-up truck transfer case, no 4x4 anymore. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]