Re: Re: Valve stem guards

Posted by raytasch on February 09, 2002 at 16:59:05 from (216.53.215.23):

In Reply to: Re: Valve stem guards posted by ol plow boy on February 09, 2002 at 15:22:44:

I guess I was not very clear in my question; sorry about that. I just started working on an old Ford I've had a while and it has guards over the valve stems on the drive wheels. These guards are about 1" X 1/4" bent flat stock and run between two rim bolts and over the valve stems. This tractor shows no signs of any hard usage or spinning of the wheels thus my question. Anyone find it neccessary to run them? These are the first of this type I've noticed on a tractor.
ray

Follow Ups:

• Re: Re: Re: Valve stem guards Grove r 19:54:22 02/09/02 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Valve stem guards Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]