o rings for sleeves

Posted by casered on February 04, 2002 at 15:25:03 from (204.186.150.229):

We have had success on the sleeve pulling on our 1530. They all came out rather easily after a week of soaking around them with kroil. The old rings that were in them were made of what looks like a cork rubber material. does any one know where we could pick a set of these up. I have an email sent to Rice equip., but no response yet. I also am wondering about maybe replacing them with a rubber o ring instead, anybody got any thoughts on that. What type of material does an o ring need to be made of to withstand the ethelene-glycol in anti-freeze. Also thanks for all the responses to my previous question.

Follow Ups:

• Re: o rings for sleeves Trucker 13:57:09 02/10/02 (0)
• Re: o rings for sleeves Duey (IA) 21:22:03 02/04/02 (1)
  • Re: Re: o rings for sleeves BillD 05:57:15 02/05/02 (0)

Post A Followup Name: E-Mail: Subject: Re: o rings for sleeves Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]