Re: Belt twists

Posted by KEH on June 15, 2007 at 16:29:34 from (64.53.72.138):

In Reply to: Re: Belt twists posted by George D. on June 15, 2007 at 14:37:26:

I think the twist is to leave openings so you can see how the bale is forming. I don't think the twist on the baler will reverse direction. It would be working against the other belts if that were so. Now on a belt being driven from the belt pulley on a tractor and twisted before being put on the implement then that would make the implement run backward. Lets say you were running a hammermill and for space reasons you wanted to put the tractor on the side opposite from normal. Twisting the belt wound let the mill run in the correct direction.

KEH

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]