Re: electric fence

Posted by TimS in Mo on June 14, 2007 at 12:10:49 from (170.40.160.26):

In Reply to: Re: electric fence posted by bill mar on June 13, 2007 at 17:56:13:

I run electric across several gates, I use the wire designed for it from the farm supply store, its about 3/8 total diameter with a 12 gauge conductor in it.

I generally just go out after a good rain, use a flat spade, cut a slot in the ground and stuff the wire down a few inches in the ground from one side of the gate or the other. Then stomp the slit closed over the wire.

I have driven a lot of tractors and equipment over those wires and haven't had a break yet.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]