Tractor Talk Discussion Board |
Re: Re: Re: 135 massey aux. hyd. pump
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Gerald on January 12, 1999 at 20:21:24:
In Reply to: Re: Re: 135 massey aux. hyd. pump posted by lee on January 12, 1999 at 19:14:28:
As I recall the manual, that auxiliary pump drives a hydraulic clutch, just like it drives the hydraulic clutch on my multipower. Getting plumbing out would be a pain e.g. requiring making holes in the castings and the flow is small, only a couple gpm. The main pump is only 4 gpm. I paid $95 for my front pump (from Northern) and probably about $50 for steel pieces, though I did my own machining. I think you will find that auxiliary pump from MF will cost a lot of money... And the total installation won't be simple. The auxiliary valve I have (19 833 A92) has three valves, one for the pto and two for auxiliaries and I get along with it for three point or drawn equipment decently. It doesn't require locking the three point down to use the hydraulics. Can't lift the three point and use the auxiliaries simultaneously though. Few multiple valve hydraulic systems run things simultaneously and independently. With 3 shift levers, hand throttle, 7 hydraulic levers (three for three point, 2 on the loader, and 2 auxiliary) I can't run them all at the same time and steer anyway. Gerald
Follow Ups:
Post a Followup
|