The auctioneer sure worked hard at the sale I was at Saturday. There were three farm sales that day with similar sized stuff. Two were almost all Deere, the other one was CaseIH. I went to one of the Deere sales because the guy was a friend, and he had some duals that I wanted. The auctioneer is a darned good local guy who usually pulls a large crowd and gets top dollar. Sometimes he sells a little too fast for my liking, but the crowd was small and he was working his tail off to get much for anything. In fact, he sold the whole sale himself instead of working as a ring man and letting his two helpers sell. I was stunned by how cheap some of the stuff went. In fact, they said the Deere 9600 combine was going all the way to Florida. It went cheap enough to be able to come out ahead by shipping it all the way down there.
I talked to a guy who had watched the CaseIH sale online and he said things went high on that one. I guess the two Deere sales split the crowd and a lot of them must have gone to the wrong auction.
Upload one or more videos to your post. Photo and video filesizes should be less than 5MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
