Quote: Jim.ME (quoted from post at 15:07:00 11/09/23) How about pictures of the entire unit, including the hydraulic system? Is this the only deck or is it a multiple deck machine? Did you do any work to the tensioners? Did the belts come with it or are they new and you chose the length? If multiple decks, are the pulley arrangements the same on all of them?
The amount of belt wrap, on the at least the drive pulley, doesn't look right. From the picture it looks like the belt only wraps on the drive pulley a bit, the entire belt run isn't visible. That's why I asked for a sketch of the belt run, to see if I am interpreting it correctly from the pictures. Is this sketch I made correct as far as the pulley layout and how the belt currently runs?
437.jpg>
Yes thats exactly how it is. When I got it all 3 decks belts were off and I bought new ones to fit like it is.(They are all 3 identical) I thought the same thing about the drive pulley but all I could figure out and it works ok other than turning the wrong direction. I mowed with it about 3 times before I figured out it was wrong. It mowed like crap.
I really appreciate all of your help!
This post was edited by cornfed8 on 11/09/2023 at 09:59 pm.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
