Methanol is not added to gas unless you add cheap dry gas or denatured alcohol yourself. Methanol is corrosive to aluminum and can cause clogging of fuel injectors, which is one of the reasons why it is not added by the gas companies. Isopropyl alcohol is used in the more expensive dry gas because it does not corrode aluminum and is not taxed like ethanol. Ethanol is added to gas by the producers.
Some people have had better experiences with E10 than others. YRMV. Not everyone under all circumstances is as lucky. There is an increased likelihood of fuel related problems when using gasoline with 10% ethanol. The seals and hoses in older equipment were not always resistant to alcohol because there was no reason to select for alcohol resistant materials. Oil and gas resistance is different from water and alcohol resistance and it is more difficult to formulate a seal that resists both. I bought a cheap chainsaw and used E10 with the correct amount of oil added. It ran only once. Better quality saws are more tolerant of ethanol.
Upload one or more videos to your post. Photo and video filesizes should be less than 8MB. Formats allowed are gif, jpg, png, ogg, mp4, mov, and avi. Be sure to use filenames without spaces or special characters, and filetypes of 3 digits lower case.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
